| Active Filters |
| | | | | | | | | | | | | |
| 22964 | | | | 1996 IPCC default | Emission Factor for CO2 Emissions from Lime Production | Process: Lime Kiln-Calcite Feed | Product: pure high-calcium quicklime (100% of CaO in lime) | | | | 0.79 | tonnes CO2/tonnes quicklime produced | Revised 1996 IPCC Guidelines for National Greenhouse Gas Inventories (Table 2-2 on Page 2.9 of the Reference Manual) | |
| 22965 | | | | 1996 IPCC default | Emission Factor for CO2 Emissions from Lime Production | Process: Lime Kiln-Dolomite Feed | Product: pure dolomitic lime (100% of CaOMgO in lime) | | | | 0.91 | tonnes CO2/tonnes dolomitic lime | Revised 1996 IPCC Guidelines for National Greenhouse Gas Inventories (Table 2-2 on Page 2.9 of the Reference Manual) | |
| 23028 | | | | 1996 & 2006 IPCC default | Emission factor for high calcium lime production | | Stoichiometric ratio is 0.785 (tonne CO2/tonne CaO or CaOMgO); Range of CaO = 93-98%; Range of MgO = 0.3-2.5%; Default value for CaO or CaOMgO content = 0.95 | | | | 0.75 | tonne CO2/tonne high calcium lime produced | 2006 IPCC Guidelines for National Greenhouse Gas Inventories (Volume 3, Chapter 2, Equation 2.8); IPCC Good Practice Guidance and Uncertainty Management in National Greenhouse Gas Inventories (Table 3.4 on Page 3.22) | |
| 23029 | | | | 1996 & 2006 IPCC default | Emission factor for dolomitic lime production | This value depends on the technology used for lime production. This value is suggested for developed countries. | Stoichiometric ratio is 0.913 (tonne CO2/tonne CaO or CaOMgO); Range of CaO = 55-57%; Range of MgO = 38-41%; Default value for CaO or CaOMgO content = 0.95 | Developed countries (See "Technologies/Practices" property.) | | | 0.86 | tonnes CO2/tonnes dolomitic lime | 2006 IPCC Guidelines for National Greenhouse Gas Inventories (Volume 3, Chapter 2, Equation 2.8); IPCC Good Practice Guidance and Uncertainty Management in National Greenhouse Gas Inventories (Table 3.4 on Page 3.22) | |
| 23030 | | | | 1996 & 2006 IPCC default | Emission factor for hydraulic lime production | | Stoichiometric ratio is 0.785 (tonne CO2/tonne CaO or CaOMgO); Range of CaO = 65-92% (Total CaO content (including that in silicate phases)); Range of MgO = NA; Default value for CaO or CaOMgO content = 0.75 | | | | 0.59 | tonne CO2/tonne lime produced | 2006 IPCC Guidelines for National Greenhouse Gas Inventories (Volume 3, Chapter 2, Equation 2.8); IPCC Good Practice Guidance and Uncertainty Management in National Greenhouse Gas Inventories (Table 3.4 on Page 3.22) | |
| 23035 | | | | 1996 & 2006 IPCC default | Water Content in Hydrated Lime | | Lime type: High-calcium lime | | | | 0.28 | fraction | 2006 IPCC Guidelines for National Greenhouse Gas Inventories (Volume 3, Chapter 2, page 2.24) See "Correction for the proportion of hydrated lime".; Table 3.5 in the IPCC Good Practice Guidance and Uncertainty Management in National Greenhouse Gas Inventories | |
| 23036 | | | | 1996 & 2006 IPCC default | Water Content in Hydrated Lime | | Lime type: Dolomitic lime | | | | 0.28 | fraction | 2006 IPCC Guidelines for National Greenhouse Gas Inventories (Volume 3, Chapter 2, page 2.24) See "Correction for the proportion of hydrated lime".; Table 3.5 in the IPCC Good Practice Guidance and Uncertainty Management in National Greenhouse Gas Inventories | |
| 27507 | | - 2.A.1 - Cement production
| | 1996 IPCC default | Emission Factor for CO2 Emissions from Cement Production | | | | | | 0.5071 | tonne CO2/tonne clinker produced | Revised 1996 IPCC Guidelines for National Greenhouse Gas Inventories (Page 2.6 of the Reference Manual) | |
| 27508 | | - 2.A.1 - Cement production
| | 1996 IPCC default | Emission Factor for CO2 Emissions from Cement Production | | | | | | 0.4985 | tonne CO2/tonne cement produced | Revised 1996 IPCC Guidelines for National Greenhouse Gas Inventories (Page 2.6 of the Reference Manual) | |
| 27509 | | - 2.A.1 - Cement production
| - SULPHUR DIOXIDE (SO2+SO3)
| 1996 IPCC default | Emission Factor for SO2 Emissions from Cement Production | | | | | | 0.3 | kg SO2/tonne cement produced | Revised 1996 IPCC Guidelines for National Greenhouse Gas Inventories (Page 2.7 of the Reference Manual) | |
| 27510 | | - 2.A.1 - Cement production
| | 1996 IPCC default | Cement Kiln Dust (CKD) Correction Factor | | | | | | 1.02 | fraction | IPCC Good Practice Guidance and Uncertainty Management in National Greenhouse Gas Inventories (Page 3.12) | |
| 27511 | | - 2.A.1 - Cement production
| | 1996 & 2006 IPCC default | Clinker fraction in cement | If cement production cannot be disaggregated by type and it is suspected that significant amounts of blended and/or masonry cements are being produced in addition to portland cement, it is acceptable within good practice to assume this overall clinker fraction. | | | | | 75 | % (by weight) | 2006 IPCC Guidelines for National Greenhouse Gas Inventories (Volume 3, Chapter 2, page 2.13); IPCC Good Practice Guidance and Uncertainty Management in National Greenhouse Gas Inventories (Page 3.14) | |
| 27512 | | - 2.A.1 - Cement production
| | 1996 & 2006 IPCC default | Clinker fraction in cement | If cement production cannot be disaggregated by type and it is known to be essentially all portland cement, then it is good practice to use this default value. | | | | | 95 | % (by weight) | 2006 IPCC Guidelines for National Greenhouse Gas Inventories (Volume 3, Chapter 2, page 2.13); IPCC Good Practice Guidance and Uncertainty Management in National Greenhouse Gas Inventories (Page 3.14) | |
| 27513 | | - 2.A.1 - Cement production
| | 1996 IPCC default | CaO Content (Weight Fraction) in Clinker | | | | | | 0.65 (0.646) | fraction | Revised 1996 IPCC Guidelines for National Greenhouse Gas Inventories (Page 2.6 of the Reference Manual); IPCC Good Practice Guid | |
| 27514 | | | | 1996 & 2006 IPCC default | Emission factor for dolomitic lime production | This value depends on the technology used for lime production. This value is suggested for developing countries. | Stoichiometric ratio is 0.913 (tonne CO2/tonne CaO or CaOMgO); Range of CaO = 55-57%; Range of MgO = 38-41%; Default value for CaO or CaOMgO content = 0.85 | Developing countries (See "Technologies/Practices" property.) | | | 0.77 | tonnes CO2/tonnes dolomitic lime | 2006 IPCC Guidelines for National Greenhouse Gas Inventories (Volume 3, Chapter 2, Equation 2.8); IPCC Good Practice Guidance and Uncertainty Management in National Greenhouse Gas Inventories (Table 3.4 on Page 3.22) | |
| 27515 | | | | 1996 IPCC default | Proportion of Hydrated Lime in Total Lime Production | | | | | | 0.10 | fraction | IPCC Good Practice Guidance and Uncertainty Management in National Greenhouse Gas Inventories (Page 3.22) | |
| 27516 | | | | 1996 IPCC default | Factor to Correct Activity Data (Lime Production) for Hydrated Lime | | | | | | 0.97 | fraction | IPCC Good Practice Guidance and Uncertainty Management in National Greenhouse Gas Inventories (Page 3.22) | |
| 27517 | - 2A3 - Limestone and Dolomite Use
| - 2.A.4 - Other Process Uses of Carbonates
| | 1996 IPCC default | CO2 Emission Factor for Limestone Use | | Limestone Use | | | | 440 | kg CO2/tonne limestone | Revised 1996 IPCC Guidelines for National Greenhouse Gas Inventories (Page 2.10 of the Reference Manual) | |
| 27518 | - 2A3 - Limestone and Dolomite Use
| - 2.A.4 - Other Process Uses of Carbonates
| | 1996 IPCC default | CO2 Emission Factor for Dolomite Use | | Dolomite Use | | | | 477 | kg CO2/tonne dolomite | Revised 1996 IPCC Guidelines for National Greenhouse Gas Inventories (Page 2.10 of the Reference Manual) | |
| 27520 | - 2A - Mineral Products
- 2A4 - Soda Ash Production and Use
- 2A7 - Other (please specify)
| - 2.A - Mineral Industry
- 2.A.3 - Glass Production
- 2.A.4 - Other Process Uses of Carbonates
- 2.A.4.b - Other Uses of Soda Ash
- 2.A.5 - Other (please specify)
| | 1996 IPCC default | CO2 Emission Factor for Soda Ash Use | | | | | | 415 | kg CO2/tonne of soda ash used | Revised 1996 IPCC Guidelines for National Greenhouse Gas Inventories (Page 2.13 of the Reference Manual) | |
